低价出售中碱SMC2400tex

 SMC纱是专用于SMC成型工业的连续无捻合股粗纱。典型产品有汽车零部件和车身、电器和仪表壳体、建筑材料中的板材、水箱板、运动器械等。

SMC roving, the multi-end roving for Sheet Molding Compound(SMC), is produced from a collection of continuous glass filaments gathered, without mechanical twisting into a single bundle. The filaments, which make up the bundles, are bonded together with a special size. Multiple bundles are then pulled together to form a strand which is wound into a tubeless package. SMC roving is designed for a wide range of structural or pigmentable polyester compression molded applications. It's applied to automotive exterior body panels with Class A surfaces, electrical and instrument equipment hull, structural plates, water-tank panels and sport equipments,etc.

 

产品特点：Features

张力均匀，短切性和分散性俱佳

Even tension，excellent choppability and dispersion

 树脂浸透速度快，相容性优良

 Fast and complete wet-out

 低静电，毛羽少

 Low static, no fuzz

 机械性能好

 High mechanical strength

技术指标：Technical data

包装：Packaging

中天俊达所产SMC纱，单个纱团聚乙烯塑料袋包覆，然后放入托盘或纸箱。每个托盘可码放64或48个纱团，每个纱团重量17kg . 纸箱堆高不大于5层，托盘堆高不超过2层。

SMC roving from Zhongtian Junda, is wrapped in plastic bags, then packed in individual cardboard box or pallet. 64 or 48 boxes could be placed on one pallet, 17kg per roll. Cardboard box can not be stacked higher than 5 layers, and pallet not higher than 2 layers .

注(Remark)：1. 托盘尺寸（长*宽*高）（cm）

              Pallet dimension(length*width*height)(cm): 112*112*(94/118)

        2. 纱团尺寸（长*宽*高）（cm）

          Roll dimension(diameter*height)(cm):26*26

 贮存：Storage

产品应置于干燥、凉爽处。若不用，请勿打开包装，以免受潮，影响使用。

It is recommended to store products in a cool, dry area. The products must remain in packaging  until use, if not, please do not open the pacakge in order to avoid moist.